Description

Rule Bilge Pump – 1100 GPH 12V Auto Sensing Electronic Series

Brand: Rule
Type: Automatic Bilge Pump
Capacity: 1,100 GPH (≈ 4,164 L/H)
Voltage: 12V DC
Operation: Auto-sensing electronic
Application: Marine bilge water removal
Series: Rule Automatic / Electronic Bilge Pump

27SA Rule Fully Automatic 1100 Submersible pump 12 volt DC.

Fully automated bilge pump with computerised operation.

• Connections:For 25mm (1″) and 28mm (1 1/8″) bore hose.
• Dimensions:120mm high, 64mm x 74mm.
• Current Draw:7(amps)
• Fuse Size:6(amp)
• Output:Up to 69 litres/minute (15 gallons/minute) without check valve. Max recommended discharge head 2m.
• Compact pump for smaller vessels.
• Tough plastic body.
• Quick release inlet strainer allows rapid cleaning.
• Low amp draw conserves batteries.
• Built-in Thermal Cut-Off. Motor rated for 1500-hour life.
• Check Valve included for Back Flow Prevention.
• Vented body to prevent air locking.
• Threaded port for easier installation and maintenance.
• No need for a separate float switch. Third wire for manual override.
• Base not interchangeable with old range but can be fitted to existing screw holes.
• Packaged Dimensions: L:18.00 x H:9.00 x W:17.00cm
• Actual Weight: 0.41 Kg  (Approx. 0.61 Kg packed)